本產品是由以聚醚改性的多種類破乳劑,適用于三次驅動采油及煉廠預處理的破乳脫鹽脫水,其能依據不同油質特性,有效破除油水乳化液,縮短油水分離時間。
This product is a polyether-modified multi-type demulsifier, suitable for tertiary oil recovery and pre-treatment in refineries. It can effectively break the oil-water emulsion according to different oil characteristics and shorten the oil-water separation time.
理化性質

適用范圍
適用于油田及煉廠原油的破乳脫水脫鹽。
Application Scope
Suitable for demulsification, dehydration, and desalination of crude oil in oil fields and refineries.
使用方法
可按規定劑量與原油直接混合即可。推薦使用劑量如下:
直接投入,用量為100~300ppm。最佳添加量由客戶根據具體情況試驗決定。
Usage Method
It can be mixed directly with crude oil at the specified dosage. The recommended dosage is as follows:
Direct addition, dosage is 100~300 ppm. The optimal dosage should be determined by the customer through testing based on specific conditions.
安全、包裝貯運
本品無毒、無異味,屬于環保型產品,應避免與眼睛和皮膚直接接觸,如不慎沾后應立即用清水沖洗。
本產品采用鍍鋅桶或小口塑料桶包裝,或按用戶要求協商確定,應密封保存,儲存于陰涼通風倉庫內,避免日光暴曬,冬季注意防凍。
Safety, Packaging, and Transportation
This product is non-toxic and odorless, and belongs to an environmentally friendly product. Avoid direct contact with eyes and skin; if accidentally contacted, rinse immediately with water.
This product is packaged in galvanized drums or small-mouth plastic drums, or as agreed upon by the user. It should be sealed and stored in a cool, ventilated warehouse, avoiding direct sunlight. Pay attention to anti-freezing in winter.
